Water Transfer / Washdown

Electric Transfer Pumps

XF Series

The XF Series pumps offer high efficiency and longer operating life. Manufactured to the highest standards from quality tested materials including stainless steel pump shaft, corrosion resistant polycarbonate impellers and IP55 TEFC Motors

From the XF range of pumps you can choose a pump for such applications as:

Special XF171S and XF192S models are available which have silicon carbide seals and Thermotection. Thermotection automatically stops the pump if the water in the casing exceeds 85 deg C, to avoid damage from closed head running. Thermotection automatically resets when the temperature falls below 65 deg C. Max Flow 230lmp, Max Head 34mt.

Dynaflo Models

Designed for medium flow applications, Davey Dynaflo pumps are ideal for such applications as dairy washdown, spearpoints, small irrigation systems and general water transfer. Manufactured to the highest standards, Davey Dynalo pumps provide high capacity, efficient and reliable water supply for applications which demand flows up to 457 litres/min, or heads up to 41m.

Davey 6200 and 6210 Dynaflo pumps utilise a highly corrosion resistant Noryl pump body. 6220 and 6230 Dynaflow models utilise the strength of cast iron to handle even higher pressure duties, with a special internal and external powdercoat finish for added corrosion protection.

The NEW 6220SS & 6230SS models feature extra heavy duty cast 316 stainless steel casings with special hard faced seals, making them ideal for aggressive water, like seawater.

 

 

 

 

 

Vertical Multistage Pumps

VM Series

The VM Series offers a full range of vertical multistage centrifugal pumps with all stainless steel hydraulic parts. The 56 models provide flow rate from 1.2m3/hr to 110m3/hr and pressures up to 230 metres to suit a full range of domestic, farm and industrial applications.

Applications

 

 

 

 

 

ISOspec Pumps

ISOspec end-suction centrifugal pumps have been designed to international standard ISO2858 ensuring a sturdy & reliable for a wide range of pumping applications. ISOspec pumps are dimensionally and operationally interchangeable with other similar pumps that conform to this standard.

CM Series Motors

All motors are MEPS(Minimum Energy Performance Standards) compliant, meeting minimum energy efficiency standards as mandated in Australian Standard AS/NZS1359.5.2000.

 

 

 

 

 

CF Series Bearing Housing

Robust / heavy duty bearing housing is manufactured in high strength cast iron providing for trouble free operation.

Applications

 

Centrifugal Pumps Cast Iron

Features

Great Pumps

The pump uses a ceramic carbon stainless sheel shaft seal, with an additional lip seal to protect the motor. The motor has a stainless steel shaft and thermal overload.

Now with nylon impellers

The standard CP200 pump has a nylon impeller which makes the pump suitable for pumping hot water to 100 deg C, oil based fluids, and other chemicals.

Advantages of Stainless Steel

Made to pump corrosive fluids, salt water, chemicals, for use in hydroponics or where pure water is important. The pump uses a cast stainless steel casing to improve corrosion resistance and reduce noise. It is at least 2.5mm thick.

CP200SN pump is 100% uses a high temperature Nylon impeller, has a Viton seal and is constructed 100% in 304 stainless steel.

CP400SL pump uses Polycarbonate impeller has a viton seal and constructed 100% in 304 stainless steel.

CP400SS pump is 100% in 316 stainless steel with a Viton seal and has an open impeller for better muck handling ability.

Ideal for use in sea water applications where 316 can be used.

 

Dairy Monster

Features

Dairy Monster Range

The Orange Hose Down pumps are made from cast iron, have stainless steel shafts and sealed ball bearings. The pump has dual seals to protect the motor. The aluminium terminal block is "O" ring sealed.

240 Volt pumps have electrical leads and plugs and the impellers are made from industrial mouldings for maximum performance. Max Head 42mt, Max Flow 500lpm.